sk
New Member
Posts: 1 
|
Post by sk on Feb 21, 2015 14:34:55 GMT
I have set up the web server and can see my db from my PC but I am unable to control the db (can't even play music) from the PC. The X12 does have a strange IP address associated with it as it starts with 10.0 where I would have expected a 192.xxx . Any help greatly appreciated!
|
|
|
|
Post by brucen on Feb 28, 2015 14:46:23 GMT
I get a 192.xxx IP, but cannot get access to the db from any browser or PC.
Much of the software seems to be work in progress
|
|
|
|
Post by Admin on Mar 5, 2015 20:42:19 GMT
Hi Guys
Might be worth re-installing the web interface and then trying again. Which browsers (brand and version) are you using?
To do this just go SETUP->NETWORK SERVICES->RE-INSTALL (this is just underneath WEB SERVER in network services)
Let me know if you're still have issues after trying this. We are expecting a new version of the web interface at some point over the next few months.
Thanks
Jules
|
|
|
|
Post by mrfossy on Nov 3, 2015 13:42:50 GMT
I had a similar problem, but it was the IP address changing each time it was switched on. Easy solution check the IP address then change to Fixed IP address and put the IP address in you found earlier along with the other info required. Then each time you access from your PC you can use the same IP address. Works fine for me.
|
|
|
|
Post by Peter on Dec 9, 2015 13:44:15 GMT
I also have the issue of the IP address for the XP changing when either the unit or my wifi router are switched off, how exactly do you change to a fixed IP address, is this done on the X12 or the PC? Interesting is that the Cocktail web interface and App do not work when the IP address changes but my Sonos system has no problem, even though it accesses the X12 through the PC?
|
|
