mrfs
New Member
Posts: 2
|
Post by mrfs on Feb 5, 2020 22:27:41 GMT
Upon boot up the display has now reduced to approx 1 inch square in the top l/h corner of the panel. Latest firmware r1047 was automatically updated some time ago and sll has been fine until today. I cannot find a downlosd for firmware version r1047 to manualiy reinstall.
|
|
johnh
New Member
Posts: 27 
|
Post by johnh on Feb 6, 2020 18:57:44 GMT
Hope it works for you.
John.
|
|
|
|
Post by bertiebacon on Feb 6, 2020 19:38:52 GMT
|
|
mrfs
New Member
Posts: 2
|
Post by mrfs on Feb 15, 2020 18:31:53 GMT
Many thanks for all your help. Have installed a new HDD but cannot update the firmware and the minimised screen problem persists. Also unit always enters the set up wizard when booting up and does not save settings previously entered. Have contacted SCV Distribution.
Best regards
Mike
|
|
|
|
Post by SWM on Feb 26, 2021 16:54:40 GMT
My X30 has just done this. I have the small screen and all the settings have gone. Has anyone managed to troubleshoot this?
|
|
|
|
Post by mrfs_guest on Mar 22, 2021 8:57:14 GMT
Hi
You need to do a Firmware Emergency Recovery. Search for firmware version X3U-CA-1.1.0.r0148, download and uzip to the ROOT directory of a USB stick. Rename the file to 'firmware.pkg'. Insert USB stick into X30 USB port. Press and hold MENU key and power on X30. KEEP MENU KEY PRESSED for 5-6 secs, then release. X30 will then update.
|
|
