|
|
Post by mardibloke on Oct 1, 2015 9:14:15 GMT
My new X12 was showing 'Insert Audio CD !!!' for any CD (I tried ~10) last night. After ripping 3 or 4 CD's
Powered it off last night, and this morning its working again.
Is this a sign of impending hardware failure, or to be expected?
|
|
|
|
Post by musicbod on Oct 1, 2015 13:49:04 GMT
I have the X10 and it seems to be a fact of life for CA/NF products that the software sometimes glitches. My suggestion as a user (not a techie) is to run "recovery" - it may or may not make a difference.
|
|
|
|
Post by mardibloke on Oct 1, 2015 14:30:53 GMT
I have the X10 and it seems to be a fact of life for CA/NF products that the software sometimes glitches. My suggestion as a user (not a techie) is to run "recovery" - it may or may not make a difference. Thanks - will try that if it happens again |
|
|
|
Post by mardibloke on Oct 5, 2015 15:14:18 GMT
I turned it off, overnight. Was ok the next morning, and has been working ok for the last few days.
|
|
|
|
Post by musicbod on Oct 5, 2015 18:08:59 GMT
That sort of solution sounds about right for the X-series  . Glad it's working. |
|
. Glad it's working.